SOUND WARRIOR
SWL-AA1

Vacuum Tube Pre-Main Amplifier (Japanese Version)

SRP HKD 8890

SOUND WARRIOR SWL-AA1
SOUND WARRIOR SWL-AA1

SOUND WARRIOR SWL-AA1 Vacuum Tube Pre-Main Amplifier (Japanese Version)

press to zoom
SOUND WARRIOR SWL-AA1
SOUND WARRIOR SWL-AA1

SOUND WARRIOR SWL-AA1 Vacuum Tube Pre-Main Amplifier (Japanese Version)

press to zoom
SOUND WARRIOR SWL-AA1
SOUND WARRIOR SWL-AA1

SOUND WARRIOR SWL-AA1 Vacuum Tube Pre-Main Amplifier (Japanese Version)

press to zoom
SOUND WARRIOR SWL-AA1
SOUND WARRIOR SWL-AA1

SOUND WARRIOR SWL-AA1 Vacuum Tube Pre-Main Amplifier (Japanese Version)

press to zoom
1/9

Bring the warm sound of a vacuum tube to your living room

Gentle & Deep Tone from the Vacuum Tube provides Excellent Sound Quality. Vacuum Tubes: 6BQ x 2 / 12AX7 x 1

Compact A4 Size - Easy to place it anywhere in your room

Design that fits your lifestyle and home decoration. Detachable Vacuum Tube Cover: put in on for safety or take it off for a clear view of the tubes.

Easy & Simple to Use: Control in the Front, Input / Output from the Back

Designed by Mr. Akihiko Amanuma, former SONY product designer, who welcomes the warmth of the vacuum tube in an A4 compact body in a stylish manner

Input: LINE 1: 3.5mm Stereo / RCA L/R; LINE 2: RCA L/R; LINE 3 / PHONO: RCA L/R. Input Sensitivity: LINE 1φ 3.5 mm / LINE 3: 270 mV, LINE 1 RCA / LINE 2: 410 mV, PHONO: 5 mV

Output: Speaker Out: L/R; Headphone Out: 3.5mm Stereo. Maximum Speaker Output: 3.2W x 2 (1kHz Distortion Rate 10%)

Speaker Impedance: 6 Ω or more (6 Ω to 8 Ω recommended). Headphone Impedance: Meets 40 Ω to 100 Ω. Speaker Output Frequency Response: 20 Hz - 20 kHz (0dB, -2dB). Tone Control: High (Cutoff 3 kHz) ± 12 dB, Low (Cutoff 100 Hz) ± 12 dB

Made In Japan. Dimensions: W290 x H92 x D210 mm / Weight: 3.7 kg / Power Input: AC 100 V 50/60 Hz